Metal and wood

Anzegem

As a furniture installer, you are responsible for assembling various pieces of furniture at customers' homes, according to the instructions and guidelines. You offer a professional and customer-friendly service during the installation process. You identify any problems and solve them independently. If there are any defects or missing parts, you must report this to the manager. If you have a driving license C, this is a big plus.

Oostende

As a versatile sheet metal worker you will perform the following tasks: assembling and furnishing fire and emergency vehicles, building chassis and cabinets, installing fire pumps and other components, and furnishing the vehicles. In addition, you will also construct, assemble and install parts during construction using the following techniques: cutting, folding, drilling, bonding, riveting and screwing, and welding (semi-automatic and TIG). Finally, you will also assemble frames, saw and drill profiles and plates, and build and install various components on and in the vehicle. You will independently carry out the work according to plans, work assignments and technical documentation provided by the project manager.

Wingene

As a MIG MAG Welder you are responsible for preparing and welding metal constructions, such as stairs, platforms and railings. The steel structures are loaded and unloaded using an overhead crane.

Wingene

As a pipe fitter you are responsible for preparing and welding metal constructions, such as stairs, platforms and handrails. The steel structures are loaded and unloaded using an overhead crane.

Wingene

As a TIG welder you are responsible for preparing and welding metal constructions, such as stairs, platforms and railings. The steel structures are loaded and unloaded using an overhead crane.

Anzegem

As an assembler, you are responsible for the complete furnishing of commercial vehicles, particularly vans. You will receive a technical plan and order form, so that you know what needs to be installed in the vehicle. If you have electrical knowledge, that is a big advantage, because then you can also arrange the wiring.

Tielt

Together with a team of committed and dynamic carpenters, you will work on challenging roof constructions, both in construction wood and oak. The entire construction process starts with work preparation, an essential link for which you are responsible. The planned projects extend across East and West Flanders and are mainly aimed at the private market.

Waregem

As an operator you are responsible for the chemical treatment of incoming orders, which consist of small metal parts. To minimize the physical strain, you work with an ETP and a small overhead crane. You will also receive internal training on the specific chemical baths in which you must treat the metal parts.

Menen

The company where you will work specializes in industrial relocations, which means that it deals with moving high-tech machines from one location to another. Together with one or two experienced colleagues, you go to the customer, where you carefully disassemble the machine or production line and then load it into the truck. Once at the new location, reassemble the machine.

Poperinge

As a welder/mechanic you are responsible for welding metal structures, both for smaller projects such as railings and pipes and for larger mechanical works. You carry out these welding works in a team based on a plan and instructions from the foreman and project manager. You proactively think along with the foreman and project manager to bring the project to a successful conclusion. We expect you to place a strong emphasis on quality and safety in all your tasks.

Deerlijk

As an operator you are responsible for the production of electric vehicles. Your tasks include taking care of the cabling and installation of lighting, as well as mounting axles, seats, and so on. In other words, it is a very dynamic job with a lot of variety. After installation, you also carry out quality checks.

Tielt

As an assembler, you work together with your colleagues in aluminum production, where you produce aluminum facade elements independently or together with a colleague. This includes tasks such as preparing and assembling aluminum windows and doors.

Tielt

As an assembler, you work together with your colleagues in PVC production, where you produce PVC facade elements independently or together with a colleague. This includes tasks such as preparing and assembling PVC windows and doors.

Harelbeke

As a mechanical technician, you are responsible for installing floors, walls, cabinets and racks in vehicles, as well as connecting accessories such as compressors, heating, signaling, and electrical cabling.

Kortrijk

As a versatile woodworker, you are responsible for operating various machines. These are responsible for various actions such as sanding, sawing and installing cabinets. This is mainly serial work. You operate machines, but you can also work with an automatic staple gun.

Wingene

As a wet painter you are responsible for preparing and spraying metal constructions, such as stairs, platforms and handrails. You must be able to work independently and you will be responsible for spraying parts with water-based coatings. The steel constructions are loaded and unloaded using an overhead crane, so experience with the overhead crane is a plus.

Maldegem

As a polyvalent woodworker within finishing you can expect a very varied range of tasks: sanding, sawing and assembling luxury beds - box springs.

Wevelgem

As a CNC machine setter / operator in the machining department, you are independently responsible for programming, work preparation and setting up CNC turning and milling machines (Fanuc & Siemens).

Wevelgem

As a welder/mechanic, you build the construction from start to finish on the basis of a plan/drawing. You are responsible for assembling and welding together (TIG) piece by piece.

Wielsbeke

As a mechanic you contribute to the realization of industrial buildings in collaboration with the assembly chief and the crane operator. You ensure a qualitative, efficient and safe placement of the metal structures. You help out wherever needed, which makes your job responsibilities very diverse.

Wielsbeke

As a welder-mechanic you are responsible for assembling metal constructions for agricultural and industrial construction. You build the constructions based on execution drawings and are jointly responsible for the end result of the product. Thanks to your knowledge of technical plan reading and your experience, you can handle any construction.

Houthulst

As a welder you are responsible for both welding and assembly work. Depending on the project at the customer, you will weld or assemble more or less. The welding consists of 60% TIG and 40% MIGMAG. In terms of welding and assembly, it is very varied work: both small and large constructions or parts of machines to complete installations. You mainly work with stainless steel (90%), because the company is mainly active in the food sector.

Wevelgem

As a tig welder you are responsible for welding aluminum. You follow the predetermined instructions and you cut the aluminum pieces to size. You drill holes in the profiles as indicated on the plan.

Roeselare

As a CNC bending machine operator (LVD) you are responsible for bending the parts of the metal constructions. You will have to be able to enter the sizes into the machine (install the parameters), select the correct knives and blocks, etc. 

Staden

As a CNC turner you are responsible for setting up and operating a teach-in lathe. The program used is Siemens.

Staden

As a CNC operator milling you are responsible for setting up and operating a milling machine. The program used is Heidenhain.

Staden

As a mechanic you work on various sites. You assemble both machines and constructions (stairs, platforms, funnels,...).

Staden

As a CNC bender you are responsible for determining the correct tools (knives and blocks), setting the dimensions and the correct angles, etc.

Staden

As a tig welder you will weld all kinds of constructions and machines for the food industry based on a technical plan. The materials consist of stainless steel.

Anzegem

As a joiner/furniture maker, you will be working in a well-equipped workshop, where you will be responsible for creating and manufacturing bespoke furniture pieces and interior projects. You will work with various types of wood and materials, requiring craftsmanship and an eye for detail.

Izegem

As a CNC bending machine operator (LVD or Durma) you are responsible for bending the parts of the metal constructions. You have to be able to enter the sizes into the machine (install the parameters), select the correct knives and blocks, etc. 

Izegem

As a assembler/welder you are responsible for assembling metal constructions on site. The parts are already made in the workshop.  

Izegem

As a CNC milling machine operator you are responsible for measuring the parts, setting up and manually programming the CNC milling machine, etc. Only piece work is offered, no serial work.

Roeselare

As a construction welder you help in the workshop with building custom work for various projects. The custom work you create is then placed and assembled by your colleagues at various locations. After an internal training you will be assigned various responsibilities. You will weld and assemble stainless steel constructions based on the plans provided. In addition, you will also bond different types of PVC and transparent plastics, such as UV filters, membranes of PE, PP, PVC, and stainless steel and steel materials.

Roeselare

As a PVC welder you help in the workshop with building custom work for various projects. The custom work you create is then placed and assembled by your colleagues on various sites. After an internal training you will be assigned various responsibilities. You will weld and assemble plastic constructions based on the plans provided. In addition, you will also glue different types of PVC and transparent plastics, such as UV filters, membranes of PE, PP, PVC, stainless steel and steel materials. You are also responsible for pre-assembling installations in the workshop, so that your colleagues no longer have to do this on site.

Kruisem

As a mechanical technician you will carry out work on behalf of the company. Some projects that can fall under your responsibility: relocation / disassembly of industrial machines, mechanical repairs and maintenance, installation of metal constructions within the industry ... This with the technical support of the engineering office located in Kruisem. What does this mean? Do you have a technical question or do you notice during a breakdown that you are short of parts or a technician? They arrange it for you from their workhouse.

Kruisem

As a welder you will carry out work commissioned by the workhouse or you will assist the customer in its welding projects in the long and / or short term. This is mainly semi-automatic. You are responsible for assembling, welding and finishing constructions in steel and stainless steel.

You will work as a CNC operator, turning and milling. You set up the CNC machines independently, you can make elementary changes and independently finish the requested pieces. Afterwards you carry out the necessary checks and check the sizes during and after finishing.

Izegem

As a technical operator you will be responsible for the maintenance of the machines, both preventive and curative. You will be responsible for the smooth running of production and assist where necessary. You will have to set up and operate the profiling machines yourself and provide the production with all the necessary materials so that the assignments can be carried out correctly. You will be responsible for making technical drawings for production.

Roeselare

For a client in Roeselare we are looking for a carpenter assembler for windows/doorframes in aluminum, PVC and wood materials.

Izegem

You are involved in welding and assembling various metal constructions. Preferably you already have some experience in a similar job and you are familiar with semi-automatic welding. You can read and understand a mechanical plan. You strive to always deliver high-quality constructions according to the drawings. Are you someone who likes to roll up their sleeves and work accurately? Then you might become our new colleague in day work.

Lichtervelde

We are looking for a mechanic for our customer who specializes in making and installing balustrades in aluminum and stainless steel. If you can saw, polish, mill and bead blasting, you are the right candidate.

Tielt

As a mig/mag welder you are responsible for welding steel stairs, handrails, etc. This is mainly custom work.

Tielt

As a welder/assembler you work in the workshop, where you build the construction from start to finish on the basis of a plan/drawing. You are responsible for assembling everything piece by piece and welding together (semi-automatic or TIG) according to the rules of the art.

Wingene

As a CNC bender you are responsible for operating the CNC bending machine.

Staden

As a pipe fitter you are responsible for laying the pipe network on location.

Menen

As a veneer cutter, you are responsible for an initial quality control and you remove the bad particles in the wood. You cut the wood to the right length with the machine.

Hooglede

As a CNC bender you are responsible for setting the parameters, cutting, bending and checking the parts, etc. 

Gent

As a polyvalent metalworker you are responsible for treating the sheet material. Manual work with compressed air hammer, plasma burning, etc. This is fully taught at the workplace. For example, you can make ventilation shafts and parts from the incoming sheet material.

Zonnebeke

As a CNC milling machine operator you are responsible for operating and setting up your CNC controlled machine. You can read technical plans well and are willing to learn programming in the long term. The control of the machines is Fanuc.

Zonnebeke

As a CNC lathe operator you are responsible for operating and setting up your CNC controlled machine. You can read technical plans well and are willing to learn programming in the long term. The control of the machines is Fanuc.

Oostrozebeke

As a gun sprayer you are responsible for the complete spraying of large constructions (installation of steel structures for buildings, walkways for overhead cranes, support structures for machines and silos, multi-storey buildings for industrial installations, etc.). You must be able to determine the correct thickness of the paint and adjust your gun properly.

Maldegem

As a furniture installer you will be responsible for finishing and delivering the end product to the customer. You will receive an assembly plan from the warehouse with the necessary materials and tools. You drive to the customer and deliver the finished product there. This is always tailor-made, so you need a good insight and can easily solve small problems.

Maldegem

As a CNC operator you ensure smooth operation and adjustment of the woodworking machine. Initially, you will work on the CNC machines together with a colleague, but you will also be a backup for operating the saw and/or masking machine. You accurately execute the plans that are delivered to you. The CNC machines you can work with are a 3-axis beam CNC machine and a 5-axis nesting CNC for woodworking with Korpus programming.

Oostkamp

As a CNC operator you will be responsible for milling, turning or grinding metals. The main products are gears used in mechanical engineering. As a result, you mainly have to deal with piece work, but sometimes a series will have to be produced. You can work independently on the basis of the technical plan and the order form. You work in a 3-shift system with morning, afternoon and night shifts. You get plenty of rest days in between.

Wingene

As a tig welder you are responsible for the welding of all kinds of parts of a machine on the basis of a technical plan. For this we use the tig las. You can weld full-time in the studio or a combination of studio and relocation.

Zedelgem

As a CNC miller you are responsible for programming and setting up your milling machine. In the morning you get your drawings of the parts that need to be made and then you get to work right away. In addition, you can also work as a conventional turner and don't mind doing this alternately next to milling

Staden

As a tig welder you are responsible for welding the machine parts in stainless steel, but also for assembling the machines on site at the customer.

Hooglede

As a pre-assembly employee you are responsible for the safe (dis)assembly of tooling on the cassettes for the various profiling lines within the company. pre-assembly is done on the basis of a set-up plan. In addition to the assembly, you are responsible for the transport of the tooling/dangerous situations/improvement proposals. You work accurately and conscientiously because you have to check your assembly work yourself.

Brugge

As a mechanical engineer you build machines in the workshop based on the technical plans. After assembly, these machines are tested. If the test was performed correctly, the machine will be disassembled again. It is then transferred to the customer where the machine must be reassembled. You start as a mechanic in the studio and after a while you can also travel to do these assemblies. These can sometimes take place abroad, where a hotel is arranged for you for this period. This goes from 1 to 2 weeks. Your duties include the following: Helping to assemble BEP machines according to drawing. Mounting and drilling of plating. Assembly of partial assemblies and construction of various machine parts to complete machines on the basis of drawings. Assembly and construction of machine parts: shafts, cams, discs, gears, moving elements, bearings, etc. Drilling and placing of adjusting pins. Disassemble machine into separate groups for shipment. Preparing the groups for shipment - greasing, prepacking, etc.

Izegem

As a CNC turner you are responsible for setting up or operating a 3 axis / 5 axis or 8 axis machine. You have to adjust a drill, fill out a log, work with a vernier caliper, etc.

Ieper

As a tig welder you are responsible for the manufacture of metal structures. These constructions are made in the company itself, in the workshop. 

Staden

As a CNC turner/miller, you are responsible for setting up and operating the CNC turning and milling (Heidenhain, Fanuc, Siemens) machine. Our client works with 3 axis, 5 axis and recently also 8 axis. You can work in a 2 shift system or the night. 

Houthulst

As a CNC operator/programmer you will be responsible for manufacturing quality wooden furniture. You will be responsible for making complete interiors. This includes kitchens, offices, cabinets, tables,...You will primarily be responsible for processing furniture panels. This means that with the CNC machine you will drill holes, mitre corners and make slots in the wood. 

Menen

As a fitter you are responsible for the assembly of various things such as awnings, table legs, etc... You do the assembly according to the plan that you receive and you finish qualitatively.

Waregem

As a CNC turner your focus is on turning mechanical parts within the metal sector (mainly gears). You analyze the plans to bring your work of the various pieces to a successful conclusion. You determine the necessary material (chisels and tools) and set up the machines. In addition, you are (limited) responsible for programming CNC controlled machines so that small series can be machined automatically.

Waregem

As a CNC milling machine operator you are responsible for milling mechanical parts, mainly gears (drilling, milling, boring and tapping). You analyze the plans to bring your work of the various pieces to a successful conclusion. You determine the necessary material (chisels and tools) and set up the machines (5-axis milling machine, hard milling, ...).

Diksmuide

As a CNC miller you will operate one or more CNC milling machines. You can convert the CNC machine in accordance with the work order and you maintain the machine(s). You ensure a timely and constant supply of raw materials and check the quality of the pieces. Finally, you are also responsible for the registration and documentation of production data.